A toilet is one of the most used items in any household. It’s easy to take it for granted, but when your toilet won’t stop running it can be an expensive problem. The good news is that there are a few simple things you can do to fix the problem yourself and save some money by avoiding costly plumbing services.

How to fix toilet that won’t stop running

Here are five tips on how you can fix your own running toilet with just a few tools that probably already exist in your home:

  • 1) Check the water level;
  • 2) Adjust the float ball or chain;
  • 3) Clean out hair clogs;
  • 4) Replace worn parts like flappers and fill valve seats;
  • 5) Clear obstruction from pipe at base of bowl. Remember, if you have an older toilet, you can also check if the problem is coming from a corroded or bad fill valve seat.

1) Check the water level: Make sure the water level in your toilet is not too high or too low. If it is too high, you can adjust the float ball or chain to lower the water level. If it is too low, you can add more water to the tank.

2) Adjust the float ball or chain: If you have to adjust the float ball or chain, make sure to do so slowly and gradually, so as not to create a bigger problem.

3) Clean out hair clogs: You can use a plunger to try to clear a hair clog, but sometimes a wire hanger will do the trick. Just poke it down into the drain hole and wiggle it around until the clog clears.

4) Replace worn parts: If you have a flapper or fill valve, they might be so old that they are not working properly. You can replace these items with new ones to fix the running toilet. Sometimes the fill valve rubber seat is corroded and will need to be replaced with a new one as well.

5) Clear obstruction from pipe at base of bowl: There might be something stuck in the toilet’s drain pipe. To free it up, you can use a plunger or auger to remove the obstruction

Fixing a toilet that won’t stop running after flush

Make sure you check if the water level in your toilet is too high or low, adjust the float ball or chain, clean out hair clogs, replace worn parts like flappers and fill valve seats, and clear obstruction from pipe at base of bowl. If there is nothing else that you can do, call a plumber. Follow these tips to fix your own toilet that won’t stop running!

Fixing a toilet that won’t stop running no tank

If the toilet has not tank and won’t stop flushing , you will need to replace the flapper, which is part of the flush valve. Replacing a toilet that won’t stop running with no tank requires some advanced knowledge about how toilets function and the tools needed to complete it. Follow these tips to fix your own toilet that won’t stop running!

Fixing a toilet that won’t stop running ball float is

If the water level in your toilet is too high , you can adjust the ball float or chain to lower it. In some cases, older toilets have corroded fill valve seats . You might need to replace them if they are not working properly.

Kohler toilet won’t stop running

If your Kohlet toilet won’t stop running follow these steps to fix it;

  • 1) Check the water level;
  • 2) Adjust the float ball or chain;
  • 3) Clean out hair clogs;
  • 4) Replace worn parts like flappers and fill valve seats;
  • 5) Clear obstruction from pipe at base of bowl. Remember, if you have an older toilet, you can also check if the problem is coming from a corroded or bad fill valve seat.

If your toilet won’t stop running after these simple fixes then it’s time to call in a plumber. Now that you know how to fix your toilet yourself you can save both time and money!

%d bloggers like this: